The Service Did Not Respond to the Start or Control in a Timely Fashion

Users experience the error bulletin 1053 which states 'The service did not respond to the showtime or command request in a timely manner'. This mistake message is the cause of a timeout that occurs after a request was initiated to showtime a service but it did not respond in the fourth dimension window.

Mistake 1053: The Service did not Answer to the Start or Command Request in a Timely Fashion

There are numerous variations of the error bulletin ranging from issues in Windows services to custom services non being able to launch (including games and other 3rd-party software). We also came across instances where Developers faced this trouble when they were developing their custom software. Here in this article, nosotros will become through all the variations of the error message and discuss what could be done to solve the problem once and for all.

What causes Error 1053 in Windows?

After receiving initial reports from users, we started our investigation and took a deep wait at all the modules involved in the mechanics of starting equally service. After gathering all the results and syncing them with user responses, we concluded that the issue occurred due to several different reasons. Some of them are listed beneath:

• Timeout settings: Windows, by default, has a timeout setting which if not met by applications, forces them to arrest and shut. If the service which you are trying to launch takes much longer to respond, then information technology volition be killed. Here, we tin change the timeout setting by manipulating the registry.
• Missing DLL file: Another case of the error occurs when yous have a missing DLL file on your estimator which is used by numerous other applications equally well. If this DLL file is in conflict or isn't present at all, you volition experience the error message.
• Corrupt/missing organization files: Some other case of why this event occurs is because there are corrupt or missing system files on your computer. If the very installation of Windows is not proper and has issues, you volition experience numerous bug including the error message nether discussion.
• Outdated Windows: Microsoft officially recognized this fault message on their official website and even released a temporary hotfix to solve the trouble. However, recently they removed the hotfix and instructed users to upgrade to the latest iteration of Windows.
• Using a Release build (for Developers): If you are trying to launch services in a Debug build of Windows, you are likely to feel this mistake message. Debug builds are not stable and don't accept all the functionality running as compared to release builds.
• Missing Frameworks (for Developers): Incompatibility of Frameworks are likewise responsible for causing the fault message. The box on which you lot are trying to run the service and your service itself must be on the same framework.
• An effect in DB service (for Developers): Another instance where you might experience this fault message is where there is a problem with your configuration of the project. The server details should correct and then the service doesn't have problem accessing.
• Corrupt installation: Some other mutual example where you might experience this mistake message is where the installation of your application (which is prompting the service) is somewhat decadent. Reinstalling helps here.
• Bad network configurations: Services communicate with your network all the fourth dimension. If your network configurations are non good, the services might not exist able to perform their tasks and hence cause the error message under discussion.
• Administrator access: The service which you are trying to launch (or a third-party is trying to launch) should be launched every bit an administrator if it is consuming system resources not meant for normal use.

Before we move on with the solutions, brand sure that y'all are logged in every bit an administrator on your reckoner and have an active internet connection. As well, follow the solution from the start and piece of work your way downwardly accordingly.

Repair Corrupt Files

Download and run Restoro to scan and restore corrupt and missing files fromhere. Once done, go along with the solutions below.

Solution 1: Changing Timeout Settings through Registry

The very first thing which we should attempt is changing the timeout settings of your services through your registry editor. Whenever a service is requested to launch, a timer is started with a predefined value. If the service doesn't start within this time frame, the error message comes forward reporting then. Here in this solution, nosotros volition navigate to your computer's registry and change the value.  If it isn't present, nosotros will create a new key for it.

1. Press Windows + R, type "regedit" in the dialogue box and press Enter.
2. Once in the registry editor, navigate to the following file path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\

3. Now, search for the primal of 'ServicesPipeTimeout'. If yous find it already at that place, yous tin movement to directly edit. Even so, if yous don't discover the entry, select Control, correct-click on any space present at the right side of the screen and select New > DWORD

   

   Creating a new Registry Primal

4. Name the fundamental as 'ServicesPipeTimeout' and ready the value every bit 180000 (Y'all can also right-click the value and click Alter if the option to set the value didn't come up in your case.

   

   Changing 'ServicesPipeTimeout' value

5. Relieve changes and exit. Restart your computer completely and then endeavour launching the service. Bank check if the issue is resolved.

Solution two: Checking for System File Corruptions

Some other thing to try before we motion on to more than technical and advanced methods is checking whether the system has any abuse or not. If your very Windows is missing files and is somehow corrupt, information technology may cause some important modules not to piece of work. As a result, you will experience the error message 1053. In this solution, nosotros volition use Window'south organisation file checker which checks all your arrangement file construction and compares the structure with that of a fresh re-create present online. If there is whatever discrepancy, the files will be replaced accordingly.

1. Press Windows + S, type "command prompt" in the dialogue box, correct-click on the application and select Run equally administrator.
2. Once in an elevated command prompt, execute the post-obit commands one past one and make certain that they complete:

sfc /scannow  DISM /Online /Cleanup-Prototype /RestoreHealth

Checking system files for corruptions

3. The latter command fixes any bug which the organization file checker diagnoses when running the scan. Restart your calculator completely after running the commands and check if the issue is resolved for good.

Solution 3: Reinstalling the application (if applicable)

Some other useful method to eradicate the error message 1053 is reinstalling the awarding which is requesting the service. Normally, third-party applications installed from an outside source (excluding Microsoft Shop) might have missing or outdated components that are requesting for some service in Windows.

Hither, what you tin practice is navigating to the official website and downloading a fresh version of the awarding. Afterwards uninstalling the current version, you can install information technology. Here is the method on how to uninstall an application in Windows.

1. Press Windows + R, type "appwiz.cpl" in the dialogue box and printing Enter.
2. One time in the application manager, search for the application, right-click on it and select Uninstall.

   

   Uninstalling the Application

3. Restart your reckoner then go along with the reinstallation process.

Solution iv: Resetting Network Cache and Configurations

If you are using a service that connects to the net and gets some piece of work done over there, it is recommended that y'all bank check whether all your sockets and other network configurations are intact and not causing any problems. If they are, your service might non be able to connect to the internet to carry out its tasks and hence cause difficulties.

In this solution, we will navigate to the command prompt as an administrator and reset the network configurations from there. If successful, the error message will exist eradicated.

Note: This will erase all the custom settings which you have set up manually.

1. Press Windows + R, type "command prompt" in the dialogue box, correct-click on the application and select "Run every bit administrator".
2. Once in an elevated command prompt, execute the following commands i past one:

netsh winsock reset  ipconfig /renew

Resetting Network Configurations

3. After resetting your network, make certain that you have internet access by checking through your browser and see if the consequence is resolved.

Solution 5: Getting Ownership of the Application

Some other rare case that we came across was not having the buying of the application caused the application not to execute the service properly. This makes sense as if the application doesn't accept plenty elevated access, information technology will non be able to transport/read the response to/from a service (specially if it is a arrangement service). In this commodity, we volition navigate to the executable of the application and then change the ownership to our username. If successful, this will solve the problem of getting the error 1053.

1. Locate the file/binder of the application. Right-click and select Properties.

2. Navigate to the "Security" tab and click on "Avant-garde" present at the well-nigh bottom of the screen equally you can see in the prototype below.

   

   Advanced Security Settings

3. Click on the "Modify" push button nowadays in the preceding screen. It volition be right in front of the owner's value. Here we volition change the possessor of this folder from the default value to your estimator account.

   

   Irresolute Owner of application

4. At present enter your user account name in the space nowadays and click on "Check Names". Windows will automatically listing all the accounts which are a hit against this name.

   

   Checking for Viable Names

If you can't find your account name using this method, you can endeavor selecting it manually from the list of user groups available. Click on "Advanced" and when the new window comes forth, click on "Discover Now". A listing will exist populated at the lesser of the screen consisting of all the user groups on your computer. Select your account and press "OK". When you lot are back at the smaller window, press "OK" again.

Browsing possible owner names

5. Now check the line "Replace owner on sub containers and objects". This will ensure that all the folders/files within the folder besides change their buying. This mode you won't have to proceed with all the processes again and again for any sub-directories present. In addition to this, we also recommend that you enable the option "Supercede all child object permission entries with inheritable permission entries from this object".
6. Now close the Properties window later clicking "Apply" and open up information technology once more afterward. Navigate to the security tab and click "Avant-garde".
7. On the permissions window, click on "Add" present at the almost bottom of the screen.

   

   Adder user account to elevated status

8. Click on "Select principle". A similar window will pop upwardly like it did in pace 4. Repeat pace 4 when it does. Now bank check all the permission (giving full control) and press "OK".
9. Check the line "Replace all child object permission entries with inheritable permission entries from this object" and press Apply.
10. Close the files and restart your computer completely. Now, endeavor launching the application and check if the upshot is resolved for skillful.

Solution vi: Updating Windows to the Latest Build

Another matter to try is checking whether you have the updated version of Windows installed on your reckoner or not. Microsoft release updates to target new changes in the Os and to support additional features as well. Some updates are 'critical' in nature and must be installed as soon every bit possible. If any of these 'critical' updates are non installed, you lot will experience issues.

1. Printing Windows + S to launch the search bar, write Update in the dialogue box and open up the Update settings.

   

   Checking for updates

2. One time in the update settings, click on Check for updates. The calculator volition now connect to Microsoft servers and see if there is any update available. If there are any updates already highlighted, perform them immediately.

Bonus: Tips for Developers

If you are a developer and are trying to launch a service in Windows, at that place are hundreds of technicalities that you should be doing accurate to spawn and go a response from service. Here in this bonus solution, nosotros will list some of the most pop causes of Error 1053 in the developing world and their solutions.

• Making sure .Cyberspace Frameworks are in sync: If the application/service which you are trying to launch is on another Framework than that of the hosting machine, you will feel bug. Brand sure that the frameworks are in sync.
• Using Release Build: Developers commonly tend to use the Debug build to test various services and their operations. Nonetheless, it was noted that not running the service in Release build cause several problems.
• To debug the startup of your service (to go more insight), insert the code listed below on the top of the OnStart() method of your service:

while(!Organisation.Diagnostics.Debugger.IsAttached) Thread.Sleep(100);

What this will do is stall the service so yous can chop-chop attach the Visual Studio debugger through Debug > Set on

• Copy the release DLL or get the DLL file from release mode rather than Debug mode and paste it inside the installation folder. This will solve any problems if related to the DLL file.
• Make sure that the database which your service/application is accessing is properly configured. If there are any issues with the database itself (or any other credentials), you lot will experience the mistake bulletin. A good practice is to check all the modules once again and make certain all the parameters and variables are properly set.

Kevin is a dynamic and self-motivated it professional person, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and assistants. Superior tape of delivering simultaneous large-calibration mission critical projects on time and under budget.

Share this post